fret rocker
stainless steel ruler, 15cm length
stainless steel ruler, 30cm length
stainless steel ruler, 60cm length
pickup routing template humbucker
flexible long scraper, 25cm length
flexible long scraper, 18cm length
fret bender for regular and stainless steel frets
jack installation tool
Snapz bridge pin puller 2.0
soundhole clamp, 12,5cm (5") length
soundhole clamp with leveler, 17,5cm (7") length
soundhole clamp with leveler, 22,5cm (9") length
soundhole clamp with leveler, 28 cm (11") length
pickup routing template ST
pickup routing template TE bridge
pickup routing template TE neck
pickup routing template P90
pickup routing template Filtertron
pickup routing template set PB, 2 pcs
pickup routing template set JB neck, 2 pcs
pickup routing template set JB bridge, 2 pcs
step drill for Rotomatic type tuners, 9.9mm and 7.8mm diameter
step drill for tuners, 8.6mm and 7.0mm diameter
stainless steel fret levelling file, hard chrome coating, 160x28x5mm
fret puller, carbon steel, blade width 5,0mm, flat blade thickness 0,40mm
flush cutting saw, 120x0.4mm blade
bracing saw, 66x0.2mm blade
wood saw rasp, open non-clogging blade design, high-carbon steel, 200mm length
wood saw rasp, open non-clogging blade design, high-carbon steel, 250mm length
Snapz bridge pin puller tool
JP Farley guitar tool, 8 quality tools, with case
mini string spreaders, set of 2
fret slot depth gauge
guitar shop tape deck
guitar shop tape deck with orange tape set
seam separation knife
crack repair tools, complete set
pot cleaning cap
Original Bullet guitar jack tightener, for 1/2" nuts
work mat, grill cloth
work mat, tweed
neck shims for bass, shaped, set of 3 (0,25 / 0,5 /1 degree)
guitar repair palette knives, set of 7
small cam clamp
soft touch pliers
Bullet 2.0 guitar jack tightener, for 1/2" nuts
Tele jack installation tool, hardened steel
Fret Dam for fretboard repair, teflon
Fret Rocker stainless steel, 10/7,5/5/3,5 cm edges
Fretbar understring leveler, 11,5 cm length
Fretbar understring leveler, 23 cm length
Fretbar understring leveler, 45,5 cm length
chisel starter set of four wood chisels (3/6/12/24 mm) in a canvas roll-up tool bag
string winder with string clipper and bridge pin remover
ESP multi spanner
endpin jack wrench
Jack the Gripper
fingerboard guards for guitar, set of 6
fingerboard guards for bass, set of 4
understring radius gauges, standard width, set of 9
stainless steel scalpel holder #4, for blades 20 up to 23
surgical scalpel blades no.26, sterile, straight cutting edge, 20 pieces
brace repair jack
3M pickguard adhesive sheet
fret saw guide
stainless steel fret cutter with near-flat jaws, requires little filing of ends
2-in-1 precision + notched straightedge for short scale (24 3/4" - 25") guitar
2-in-1 precision + notched straightedge for long scale (25.3"- 25.5") guitar
tapered reamer tool for tuning peg holes
THE KEY intonating tool
Bullet guitar jack tightener
knob puller tool
understring radius gauges, standard width, set of 4
archtop guitar helping hand
refret saw, 0.018" (0,46 mm) blade thickness
refret saw, 0.023" (0,58 mm) blade thickness
surgical scalpel blades no.23, non-sterile, 20 pieces
pasteur pipette, 1 ml, disposable, 50 pcs
Bullet 2.0 guitar jack tightener, for 11mm nuts
Pullit knob puller
mini cam clamp
large cam clamp
neck support caul
locking contour gauge
string spacing rule
resin brace gluing wedge
neck shim 0.25 degree shaped for electric bolt-on neck guitar
neck shim 0.50 degree shaped for electric bolt-on neck guitar
neck shim 1.00 degree shaped for electric bolt-on neck guitar
guitar/bass multi-tool
Bronze Hammer zum Bundieren, flache und gewölbte Seiten, 300mm Stillänge
Zange zum Schneiden des Bundhalses an den Bundenden, für medium Bünde
Zange zum Schneiden des Bundhalses an den Bundenden, für Jumbo Bünde
guitar neck support
The Arch Work Station
Stufenlehre für Gitarre, misst Saitenlage, Höhe von Bünden, Tiefe der Sattelkerbung
Groobar 4er Set, Schutz vor zu tiefen Einschneidungen der Saitenkerbung im Sattel
Fret Setter zum Zurücksetzen von Bünden in das Griffbrett ohne die Saiten lösen zu müssen
Hammer mit 2 Köpfen Plastik & Stahl, Gewicht 225gr, Kopf Durchmesser 25mm, Kopflänge 75mm, Stilläng
